安科瑞霍尔传感器中心

咨询热线:

18860995103

应用案例

当前位置 : 首页 » 应用案例 » 工业控制领域 » 安科瑞智能操控装置在上海特斯拉工厂配电工程的应用

安科瑞智能操控装置在上海特斯拉工厂配电工程的应用

 Application of Acrel Smart Control Device in Shanghai Tesla Factory Distribution Project 

0.背景 Background

2018年10月17日,上海市临港管委会表示,特斯拉(上海)有限公司已成功摘得上海临港装备产业区Q01-05地块864885平方米(合计1297.32亩)的工业用地。2019年1月7日,位于上海东南一角的两港西大道与正嘉路交叉口,特斯拉工厂一期宣布开工建设。按照规划,该工厂一期年产能为25万辆纯电动整车,包括Model 3等系列车型。2019年3月,特斯拉工厂一期工程建设敲定上海本土建设企业——上海建工集团。特斯拉工厂是上海的外资制造业项目,也是特斯拉在美国之外的工厂,2019年1月开工建设。

October 17th, 2018, Shanghai Lin-Gang management committee confirmed the Tesla (Shanghai) Co., LTD has successfully won the land mass Q01-05 l,   864885 m² of industrial land. On January 7th, 2019, first step construction of Tesla factory was announced at the intersection of LiangGang West Avenue and ZhengJia Road, located in the southeast corner of Shanghai. The plant is scheduled to have an annual capacity of 250, 000 electric vehicles at the first step, including models such as the Model 3. In March 2019, the first step of Tesla factory construction was finalized as Shanghai Construction Engineering Group, a local construction company in Shanghai. The Shanghai factory is Tesla's another factory besides the United States and will start construction in January 2019.

1.概述 Overview

本项目为特斯拉上海临港工厂二期工程,该项目配电工程有3个配电房,包括能源中心C2,联合厂房4以及变电站进线隔离柜,共60面10kV高压柜。

This project is the second step of Tesla's Shanghai Lingang Factory. This project includes 3 distribution rooms, including energy center C2, union workshop 4 and substation incoming isolation cabinets, with totally 60 sets of 10kV high voltage cabinets. 

2.产品方案 Product Solution

2.1 产品需求 Product requirements

本次针对特斯拉上海临港工厂二期工程,需要配置智能操控装置,对厂区内配电工程中所有高压柜状态进行的监测。该项目的要求如下:

1)一次动态模拟图,带电显示及闭锁; 

2)温湿度数字控制,数码管显示;

3)分合闸、储能、远方/就地开关;

4)语音提示,人体感应;

5)柜内照明操作;

6)RS485/Modbus 通讯。

根据上述要求,故此选择安科瑞ASD200智能操控装置。安科瑞ASD200智能操控装置外形结构如下: 

For the project of Tesla Shanghai Lingang factory, smart control device is required to monitor the state of all high-voltage cabinets in the power distribution cabinet in the distribution room. The requirements of the project are as follows:

1) A dynamic simulation diagram, electrical display and blocking;  

2) Temperature and humidity control, LED display;

3) Switch on and off, energy storage, remote/local switch;

4) Voice prompt and human body induction;

5) Lighting operation in the cabinet;

RS485/ Modbus communication.

In order to meet the above requirements, we choose ASD200 smart control device. The external structure of Acrel ASD200 intelligent control device is as foll